IC-210 Specs

IC-T10 Home

IC-T10 VHF/UHF Dual Band FM Handheld

Specifications

General
Frequency coverage (MHz)
Tx
Rx
FM broadcast
144-148, 430-450
136-174, 400-479
88-108
Number of channels 208 channels (including 2 call and 6 scan edges)
Type of emission F2D, F3E (FM)
Frequency stability ±2.5 ppm (–20°C to +60°C on the basis of 25°C )
Power supply requirement
External DC power
7.2V DC nominal
10-16V DC (with AD-149H)
Current drain
Tx High
Rx Max. Audio
Less than 2.5A
Less than 600 mA
Antenna impedance 50Ω (SMA)
Operating temperature range -20°C to +60°C; –4°F to +140°F
Dimensions (W x H x D;
projections not included)
52.2 × 111.8 × 30.3 mm;
2.1″ (W) x 4.4″ (H) x 1.2″ (D) inches (with BP-280)
Weight 278g, 9.8 oz (with BP-280 and antenna)
Transmitter
Output power 5W, 2.5W, 0.5W
Max. frequency deviation ±5.0 kHz / ±2.5 kHz (W/N)
Spurious emissions Less than –60 dBc (High, Mid), Less than –13 dBm (Low)
Ext. microphone connector 3-conductor 2.5 (d) mm (1/10″) / 2.2 kΩ
Receiver
Receiver sensitivity Less than 0.18 µV (at 12 dB SINAD)
Squelch sensitivity Less than 0.18 µV (at squelch threshold)
Adjacent channel Selectivity More than 55 dB (FM, 25 kHz)
More than 50 dB (FM Narrow, 12.5 kHz)
Spurious response More than 60 dB
Audio output power
(at 10% distortion, 8Ω load)
Internal SP
External SP
HM-222HLWP

1500 mW (typ.)
450 mW (typ.)
1500 mW (typ.)

Ext. speaker connector 3-conductor 3.5 (d) mm (1/8″) / 8Ω

All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications

Standard MIL 810 G
Method Proc
Low Pressure 500.5 I, II
High Temp. 501.5 I, II
Low Temp. 502.5 I, II
Temp. Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV
Ingress Protection Standard
Dust & Water IP67 (Dust-tight and waterproof protection)

Supplied Accessories

Antenna, FA-S270C

Battery pack, BP-280

Belt clip, MB-133

Rapid charger, BC-213

AC adapter, BC-242